更新时间:2024-06-19
有效日期:还剩11天
产品详情
类别Category | K型机系列(4导柱型)/K Series(4 Tie Bar) | |||
机型 Model | SCJ-65K2×1.5D | |||
项目 | Items | 单位 Units | 参数Specification | |
基本参数 Specification | 类别 | Category | / | 单层 1 layer |
制品容积 | Max. Blow Volume | L | 5 | |
适用原料 | Material | / | PE,PP | |
模头坯料数量 | QTY Of Die Head | / | 1 | |
常用模头中心距 | Die Head Distance (Center to Center) | mm | / | |
机器净重约 | Net Weight | kg | 4600 | |
机器外形尺寸 | Machine Dimension | mm L×H×W | 3400X2200X2100 | |
模头 Die Head | 模头加热段数 | Die Head Heating Zone | / | 2 |
模头加热功率 | Die Head Heating Power | kW | 4 | |
锁模架系统 Carriage system | 模架数量 | QTY Of Station | / | 2 |
最小合模距 | Min Mold Closing Distance | mm | 200 | |
开模距 | Max Mold Openning Distance | mm | 450 | |
模板尺寸 | Effective Dimension Of Mold Plate | (mm,W×H) | W300×H400 | |
摆架行程 | Carriage Stroke | (mm) | 450 | |
锁模力 | Clamping Force | kN | 43 | |
挤出系统 Extruder Unit | 螺杆直径 | Extruder Diameter | mm | 65 |
螺杆长径比 | Extruder Length/Diameter Ratio | L/D | 24 | |
螺杆转速 | Extruder Rotating Speed | r/min | 20-67 | |
塑化能力 | Max Extrusion Capacity | kg/h | 60 | |
挤出电机额定功率 | Extruder Motor Rated Power | (kW) | 15 | |
机筒加热段数 | Barrel Heating Zone | / | 3 | |
机筒加热功率 | Barrel Heating Power | kW | 7 | |
冷却风机功率 | Cooling Fan Power | kW | 0.12 | |
动力系统 Power Unit | 油泵电机额定功率 | Oil Pump Motor Rated Power | kW | 7.5 |
液压系统额定工作压力 | Hydraulic System Rated Working Pressure | Mpa | 14 | |
气动系统额定工作压力 | Pneumatic System Rated Working Pressure | Mpa | 0.8 | |
水冷系统额定工作压力 | Cooling System Rated Working Pressure | Mpa | 0.4 | |
通用制品耗气量(压缩后) | Universal product air consumption(compressed) | m³/h | 14 | |
热切刀变压器功率 | Hot Cutter Power | kW | 2 | |
装机总功率I | Total Installed Power | kW | 35.62 | |
备注 Remarks | 液压油牌号/油箱容积 | Hydraulic oil NO. / tank volume | L | 46#/160L |
冷水机选型(风冷/水冷) | Chiller recommend (air-cooled/water-cooled) | hp | 5 | |
空压机选型(加储气罐) | Air compressor recommend (Add gas storage tank) | hp | 10 | |
备注/Remarks: | 以上机型 Model均可叠加100点壁厚控制系统,叠加后改变的参数如下/All the machines above can be optionally equipped with 100 points parison control system,parameters would be changed as below: | |||
叠加壁厚控制后 After with 100 points parison control | 机型 Model | Model | / | SCJ-65K+S2×1.5D |
壁厚油泵电机额定功率 | Parison Servo Motor Rated Power | kW | 5.5 | |
装机总功率II | Total Installed Power | kW | 41.12 | |
锁模板示意图 Clamping plate | ||||
备注: 1、各机型的加热功率与模头配置有关,因模头配置不同,可能出现加热功率稍有差异的情况。 2、本参数表仅供参考,实际机型参数可能会有所调整。 | ||||
Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. |
通风机 电解质分析仪 腻子粉搅拌机 压滤机 多功能搅拌机 蒸发式冷凝器 蒸发器 高剪切乳化机 轴流式通风机 常压锅炉 管壳式换热器 冷却塔配件报价 燃气锅炉 硅橡胶捏合机 盘式真空过滤机 过滤机 混凝土搅拌机 皮带输送机报价 过滤器 螺杆式冷水机 隔膜压滤机 换热器 煤矸石粉碎机 冷却塔风机 混合器 列管冷凝器 筛分机 搅拌机 铝制散热器 离心通风机 搅拌器 品牌冷却塔 压力容器 冷冻机 气流粉碎机 油冷却器 冷凝器 闪蒸干燥机 蒸汽锅炉 冷却器 输送机报价 玻璃钢储罐 离心机 饲料粉碎机 不锈钢冷凝器 捏合机 塑料粉碎机 砂磨机 乳化机 搪瓷反应釜 散热器 反应釜 工业冷水机 对辊破碎机 反应锅 秸秆粉碎机 反击破碎机 反应锅 精密过滤器 粉碎机报价 反应器 冷冻干燥机 钢衬塑储罐 带式压滤机 冷冻离心机 钢制散热器 袋式过滤器 闭式冷却塔 高速分散机 冲击式破碎机 超微粉碎机 高速离心机 电加热反应釜 锤式破碎机 高压锅炉管 小型冷水机 真空过滤机 板框压滤机 旋转蒸发器 制冷压缩机 卧螺离心机 圆锥破碎机 中药粉碎机 万能粉碎机