AIRTAC单向节流阀效果图4V210-06 24V

AIRTAC单向节流阀效果图4V210-06 24V
5, connecting the main road, pay attention to stop with a winding can not be more than the end of the tooth,
And pay attention to clear the pipe joints within the dust, iron and other stolen goods;
3、请注意安装条件是否符合技术要求
（如 “工作压力” 、“使用温度范围”等），然后安装使用；
6, please note that dust, remove when not in the inlet and outlet dust cover.
Lightweight and compact;
2, exhaust throttling, sensitive adjustment, high precision;
3, multi-position installation, easy to install;
4、尽量避免在震动的环境下使用，并注意低温下的防冻措施；
使用前注意检查组件在运输过程中是否损坏，然后安装使用；
2、安装时请注意气体流动方向（注意“→”方向）
及接管牙型是否正确。使用介质必须经过40μm滤芯过滤。
Before use to check whether the components in the transport process is damaged, and then install the use;
2, please note that the installation of gas flow direction (note "→" direction)
6、请注意防尘，拆下不用时应在进、出气口装防尘套。
结构轻巧、紧凑；
2、排气节流，调节灵敏、精度高；
3、多位置安装，安装使用方便；
And whether the tooth type is correct. The media must be filtered through a 40 μm filter.
3, please note whether the installation conditions meet the technical requirements
(Such as "working pressure", "use temperature range", etc.), and then install the use;
 

AIRTAC单向节流阀效果图4V210-06 24V